W796CF Dust Extractor With 1 Micron Cartridge Filter
- W796 1hp Professional Dust Extractor
- CF1519 1 Micron Cartridge Filter
W796 is a portable dust and chip extractor aimed at the professional workshop needing to extract from one machine at a time.
- Professional Quality Motor
- Can Run up to 8 Hours a Day
- Ample 1000m3/hour Flowrate
- Quiet Induction Motor
- Transparent Collection Bag
- 2m Length of Hose Included
Highly recommended for MDF users this unit is suitable for fine dust or chip producing machinery such as double mitre saws, sanders, routers, table saws, bandsaws and spindle moulders.
Using the now upgraded 2 micron fine mesh cotton filtration bag and a see through heavy gauge plastic collection bag both fastened by quick release metal straps, the workshop will be not only a cleaner environment but a healthier one as well.
Supplied with ‘indestructible’ steel fan, 2m length of 100mm diameter flexible hose, 2 hose clips, 100mm inlet, transparent collection bag, 4 steering castors, cable and plug. Runs on a standard 13 amp fused supply.
|Motor (Induction)||750w (1hp)|
|Flowrate (cubic metres per hour)||1000 m3/hour|
|Bag Capacity||70 Litres|
|Collector Drum Diameter||370mm|
|Dimensions (WxDxH)||780mm x 390mm x 1370mm|
CF1519 cartridge filter can be used to upgrade any chip extractor with a 370mm diameter collection drum. Replace the cloth filtration bag with a cartridge to increase the filtration performance down to a super fine, 1 micron particle size. The extra deep pleats in the filter material, increase the surface area of the filter so that there is no loss in air flow compared to the original cloth filter.
This allows the extractor to be used for operations which produce very fine dust such as sanding and cutting MDF. The particle size of fine woodworking dust is generally between 2 and 3 microns. Research shows 99% of wood dust, produced by machining softwood, hardwood or MDF, is within that range. The extractor can still be used with all the normal workshop machines which produce dust and chips, such as: bandsaws, table saws, planers, thicknessers and spindle moulders.
The cartridge is very simple to install, simply remove the cloth bag and support arm on the extractor then fit the cartridge in its place. A metal quick action clamp secures the cartridge in place.
To ensure a long life without any deterioration in performance the filter includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which clean the inside of the filter and prevent clogging.
- Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.