W696CF Dust Extractor With 1 Micron Cartridge Filter CF1519.
- W696 1hp Dust Extractor
- CF1519 1 Micron Cartridge Filter
W696: The best buy in our Hobby range of wood dust and chip extractors, this amazingly low priced unit brings affordable dust control to the woodworking enthusiast.
It is a portable floorstanding unit intended for the one-man workshop and can be coected to any bench top machine or floorstanding machine such as bandsaws, planer thicknessers, table saws. The inclusion of the floor sweeping attachment means it can easily be used to clean up the workshop floor.
- Quiet Induction Motor
- Highly Portable
- 5 Micron Filter Bag
- Tough Powder Coated Paint Finish
- Transparent Collection Bag
- Quick Action Metal Bag Clamps
The induction motor ensures that noise levels are kept to a minimum. Dust and chippings are all collected in the transparent collection bag which when full can either be emptied and refitted or disposed of and a replacement fitted.
The extractor is finished in a tough paint job to keep its looks for many years.
The maximum ruing time for this machine is 2 hours without rest. If you are a professional user who needs continuous extraction, please see the equivalent machine in our professional range W796.
Supplied with steel fan, 2 metre length of our tough adjustable length hose, transparent plastic collection bag with quick release metal strap, floor sweep attachment, castors, NVR switch, cable and plug.
|Motor (Induction)||750w (1hp)|
|Flowrate (cubic metres per hour)||1020m3/hour|
|Collection Bag Capacity||70 Litres|
|Dimensions (WxDxH)||900mm x 390mm x 1570mm|
CF1519 cartridge filter can be used to upgrade any chip extractor with a 370mm diameter collection drum. Replace the cloth filtration bag with a cartridge to increase the filtration performance down to a super fine, 1 micron particle size. The extra deep pleats in the filter material, increase the surface area of the filter so that there is no loss in air flow compared to the original cloth filter.
This allows the extractor to be used for operations which produce very fine dust such as sanding and cutting MDF. The particle size of fine woodworking dust is generally between 2 and 3 microns. Research shows 99% of wood dust, produced by machining softwood, hardwood or MDF, is within that range. The extractor can still be used with all the normal workshop machines which produce dust and chips, such as: bandsaws, table saws, planers, thicknessers and spindle moulders.
The cartridge is very simple to install, simply remove the cloth bag and support arm on the extractor then fit the cartridge in its place. A metal quick action clamp secures the cartridge in place.
To ensure a long life without any deterioration in performance the filter includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which clean the inside of the filter and prevent clogging.
- Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.