Covid-19 Update: Mail Order is Business As Usual, Click Here for more information

Sedgwick TE-1/3 Single Ended Tenoner 1 or 3 phase.

Sedgwick Single Ended Tenoner

PSedgwick Model TE-1/3 Single Ended Tenoner. Available in 1 phase or 3 phase.

Save £££s give us a call for best price best prices 01539 733774.

Taking only minutes to set up the TE is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is sucured by a cam action clamp. Its end is then passed between two vertically mounted cutter heads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder lenght are set using the rule on the end stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor, again reading from the rule.

Each cutting head has provision for profile for profile knives to enable the operator to match the cross section of the components being jointed.

3 phase model fitted with new IE2 High Efficiency Motor, this gives you a net 2-3% saving in cossumption.


Two motors 1phase/3phase : 2.2kw Timber capacity : 130 x 310mm Timber capacity with fence at 45 degrees : 130 x 195mm Maximum tenon length : 155mm Maximum length of tenon – 2 pases : 205mm Vertical adjustment of bottom block : 0 to 60mm Vertical adjustment of top block : 0 to 120mm Horizontal adjustment of top cutter block : +-32mm Table size : 800 x 310mm Table working height : 860mm Cutter heads : 160dia x 60mm wide Both heads come with 4 shear cut replaceable knives and 2 spur cutters. Provision for 2 scribing cutters and chip limiters is provided in both the top and bottom heads. Weight : 300kg


Call Now Button
Enquire Now
Shopping Basket
There are no products in the cart!
Continue Shopping